Відео

My issues have mainly been around the wiring of the hot end, I thought I’d fixed it but no. They sent me another unit which I need to unbox

So if you are running Creailty OS / klipper via a sonic pad I’d suggest you look at the error logs via the web ui you should at that point see what it’s erroring on. On your small prints are they positioning in the middle or to one side ? To be honest it sounds like it’s not positioning correctly.

@@TheRealSamPrentice Thanks for your answer, my friend. I had made the offset settings, the printer works right in the middle. I will try to make thin and high prints in the corners of the printer and see if there is a problem with them. I did not understand much from the error logs, but if I find someone who does, I will show you. I did not try cooling the motors either, if there is no information in the error logs that will solve my problem, I will try cooling the motors.

I just backed one of the Max, so if they drop out and I loose out, you owe me a chair Sam lol

@anonymouspanda8300 done!

Also can’t wait for my K2 as well lol, I’m sure you’re just as excited

Thank you Stephen, it’s was harder to film than I thought it might be, but I have a pretty good team of editors! My son also likes spinning around on this ;)

Glad you enjoyed! ;)

You might be able to sell your old chair on eBay, uploaded video when you’ve got a cold

That’s for the comment on a 3 month + old Video we are all over it

Like always we might have to specially adapt it

The fan doesn’t seem loud I mean having just run the t1 which is a jet engine.. this is pretty quiet, the movement is louder

Sure well currently on the version that I’m using the XL doesn’t appear to work the mark 4’s do though. The app I’m using is via TestFlight and is a beta version so I don’t know if that’s different but that’s what I’m commenting on. As always happy to be wrong ;)

@@TheRealSamPrentice Perhaps the Android and iPhone versions are slightly different too...

@ulaB what are you using ?

@@TheRealSamPrentice Android, App Version 1.0.2+91. That said, I can see XL jobs, pause and stop them, but I can't see the print queue it seems.

@ulaB so this is Version: 1.0.2 (92) for iPhone but no xl options only mk4.. I’ll ask them about it.

That’s a great point, I guess we will just have to twitch stream it and hope for the best

For $1100, , these issues shouldn't exist. It still suffers from the same problems as the Ender era-bed adhesion issues, layer shifts, warping, clogs, lack of camera and more. The Prusa Reddit is full of daily examples. Yet, you think it's okay to add extras at that price. It's just a small bedslinger without linear rails, another subpar choice. Finally, it's getting an accelerometer after years, even though Prusa convinced its fans that custom input shaper values weren't needed. They actually believed it! 🤣

Okay

@@TheRealSamPrentice I like your "sure, now stop bothering me" approach when people don't know what they are talking about. :-) I do like to mess with Satan though. Please show me one printer that does not suffer from bed adhesion issues, layer shifts, warping or clogs every now and then - especially when used with cheap or specialized filaments. If you want a camera, add a camera. I'd rather have my own than stream all my videos to some cloud service I have no control over. People have added rails to MK3s and MK4s without any improvements in quality or speeds. The accelerometer is optional, because - guess what - it is not needed unless you heavily mod the extruder. Good luck doing that to other printers by the way.

You can’t please everybody right. I’m not here to change anybody’s mind and if you mind just made up, I’m not gonna waste time on it.

Hey Sam! I'd love for you to chime in on the likely impact of Stratasys going after Bambu for patent infringement relating to FDM, heated beds, and other features that almost all FDM printers use/have (if they win). I'd think that Creality would be a bigger target for them with Prusa close behind. Any thoughts?

@@jim-i-am Hey dude I think I made that very comment somewhere in reply already, but sure! Remember I have no skin in that game but the conflict around IP is interesting. Stratasys I expect will be looking for a pay day, but you might find that they battle it out. Also some of the stuff they locked in Prusa was doing years before, this isn't a new game. 3D Systems sued formlabs in 2012. Markforged to pay 12M to Continuous Composites 2024 WOBBLEWORKS vs 3D SYNERGY TECHNOLOGIES.. most of these are power plays at profit in companies... The reason its interesting is because Bambu are a bigger player with profits.. Watch and see if they settle or battle it out.

Glad you like it!

Great to hear that you are having a positive experience.

and that's why it's great that you can just upgrade it for $99 ;)

It’s not for everyone

Let’s see what we can work out the next event

You know, weirdly, she doesn’t get on camera nearly enough!

Love you Phil

Sounds good !! Let me know how you get on, I’d like to upgrade my mk4 now too to be fair !

Thought I just read something on that

welp, I will still buy 4 upgrade kits

Im willing to bet my left kidney that this guy is a bambu owner and is still blind to the endless flaws the x1 has

@@Enjeenier actually I never owned a Bambu lab and I am a MK3s+ and MK3.9 owner and waiting for my 2 tools prusa XL and 3.9s upgrade to be shipped. I got my 1st two kits when prusa used to sell them For 749USD that was a good price

@@baderalafghani4564 If so, you should know where the extra price comes from: Manufacturing in Europe, livable wages, working conditions, product safety, taxes, ...

Got it! What an awkward mistake, I’ll wait their email to confirm your address in that case !

They won’t do that, personally all of that stuff is a money play, enforcement of IP generally ends in settlements, plus Bambu were saying they haven’t even had the legal papers. They are going after the profit, this happens all the time but isn’t public knowledge. It happened with the 3D pens and loads of people got sued, but that was because they wanted to sell and retain ownership, stratasys will want to come out of that cleanly Especially now there’s public focus.

Sadly Stratasys is suing Bambu for lost profits because Ultimaker sucks compared to Bambu

On your last point, not at all it was refreshing to move into that direction I’ve been using the mk4 and XL on various projects and it’s been enjoyable playing with the settings and using it without being told what to do. I’m not a robot ;)

@@TheRealSamPrenticeI get what you’re saying about stepping back but isn’t that just nostalgia, going back to when tinkering was a must to get the best from your printer. I got caught into the prusa hype and the experience fell far short from my personal experience. I have to swap back and forth from my Creality printers and my Bambu lab machines. You can apply your experience to tune Bambu profiles and improve the output, but out of the box experience is hard to beat with the Bambu printers.

@@TheRealSamPrentice As happy3dprinting said, it’s probably nostalgia. Logically, tinkering makes the hobby harder and less enjoyable and accessible to people. Bambu marks a driving force in the hobby, forcing people to innovate. Prusa was getting lazy honestly with the Mk3, they were forced to release the mk4. The lawsuit won’t just affect Bambu, it’ll basically make heated beds and textured plates illegal for the industry.

@Happy3dprinting for sure and I’m sorry you’ve not had a positive experience, I have many Bambu printers but each manufacturer has an edge to it, so for me keeping the balance is important

Yeah, stick to the printers that don’t have glass is my point

I agree on the fan. I was like GOOO! when I first saw it. But the fat that we get 360 degree cooling for overhangs is great.

Thank you

Oh I don’t know about that. Like in say id like to keep impartial but remember I’ve been to Creailty, Bambu, Anycubic, E3D, ELEGOO and so on, visiting Prusa is the same. I’ll gain knowledge and get a better sense of their direction.

@@TheRealSamPrentice Looking forward to the follow up stream.